OSD Yamaha PWC Triple Carb Rebuild Kit #2 - Some '99-2005 1200cc

  • Model: OSD1332
  • Shipping Weight: 0.75lbs
  • 2 Units in Stock
  • Manufactured by: OSD

Starting at: $159.99

Please Choose:

Fuel System Opt. Extras









Add to Cart:
NOTE THIS KIT NEEDLES AND SPRINGS ARE BASED ON OEM MICROFICHE PART NUMBERS. IF YOUR YEAR/MODEL HAD A SERVICE BULLETIN CHANGE TO DIFFERENT SPECS WE DON'T HAVE INFO ON THAT SO ITS ALWAYS IMPORTANT TO MAKE SURE YOUR PARTS YOU REMOVE MATCH THE NEW ONES YOU'RE INSTALLING.

We've seen many different people selling individual rebuild packages that don't include all the important parts needed for a complete and proper rebuild of all three Mikuni carburetors on your Yamaha, therefore we put the package below together to help with that project. The list a little farther down the page will tell which Yamaha years/models this kit works with. We The package offered in this sale features OEM Mikuni parts instead of cheap aftermarket parts. Why use OEM instead of cheap alternatives? Mainly, the OEM Mikuni diaphragm that operates the needle valve is manufactured to a much better tolerance than aftermarket so pop off is easier to set and more consistent. The included gaskets, diaphragms and other soft parts are of a much better quality than aftermarket as well. If you're going to all the work of rebuilding a Mikuni, you want the best! If you're redoing your carbs, give this complete package some serious thought!

This kit works with the following...

PWC
1999 XL 1200 LTD X
2000 GP 1200 R
2000 XL 1200 LTD
2001 GP 1200 RZ
2001 XL 1200 Z
2002 GP 1200 A
2002 XLT 1200 A
2003 XLT 1200
2004 XA 1200 A XLT 1200
2005 XLT 1200

JETBOATS
2000 XR 1800
2001 XR 1800

  • Includes all OEM Mikuni soft and hard parts to rebuild all three carburetors including internal filters, gaskets, diaphragms and more. Note too the picture above it's hard to see the clear check valve diaphragms but they're included too.
  • Includes Three (3) NEW OEM Mikuni VITON Needle Valve Assemblies sized for your application (per microfiche calls for 64T-14916-01-00 - 1.2 needles). Note these aren't included in a Mikuni Carb Kit but are in this OSD kit!
  • Includes Three (3) NEW 6R7-14253-00-00 Needle Arm Springs which should be all you need for proper tuning.
  • As an extra bonus, also includes NEW Stainless Hex Cap Screws to replace those easily stripped slotted ones!

  • Note this kit doesn't include the pin or arm for the needle valves since those usually don't go bad but if you want those though, select the option below to add and we'll include three sets of those too.
  • Note this kit doesn't include the Accelerator Pump Diaphragm (Yamaha p/n 66E-14170-00-00) but if you want one though, add below.
  • Note this kit doesn't include the large formed o-rings (Yamaha p/n 66E-14563-01-00) on the fuel pump side (3 required) since those usually don't go bad and they're expensive. If you want those though, add below.
  • Note also we mainly deal with Sea Doo watercraft and don't know much about Yamaha so if you have a question about how to rebuild your carbs, consult your service manual or one of the many forums online for tips.

This product was added to our catalog on Wednesday 01 January, 2014.

*PARTS SEARCH*

We don't have a way for you to look up oem parts yet but you can use the parts search HERE to get part numbers then use the OSD search to see if we have what you need. If the part doesn't show contact us and we'll add any parts not listed to our site (if not discontinued).

Payment Methods Accepted...

NOTE WE ARE CLOSED 11/11 - 11/23. ANY ORDERS PLACED DURING THAT TIME WILL SHIP ONCE WE'RE OPEN AGAIN.

NOTE UNTIL FURTHER NOTICE WE ARE CLOSED ON FRIDAYS.



We accept Visa, Mastercard, Discover, and AmEx credit cards through PayPal

USING THE PAYPAL GATEWAY
TO USE YOUR CREDIT CARD SELECT PAYPAL FOR YOUR PAYMENT METHOD THEN ONCE REDIRECTED THERE CLICK THE BUTTON THAT SAYS "PAY WITH CREDIT/DEBIT CARD". YOU THEN CAN ENTER YOUR CC INFO WITHOUT HAVING TO SET UP A PAYPAL ACCOUNT.


Looking for a discount coupon? Our prices are already 10-20% less than everyone else so we don't play that game. If you find an item on another site for less though let us know so we can fix that!
Other Payment Methods Accepted Too!

Manufacturer Info

TECH LINKS

Sea Doo Tech
RAVE Valve/Housing Wear Check
PWC Engine Ref. Chart
Jetboat Engine Ref.
Choke Cable Info Chart
Coil Reference Chart
Crank Exploded Views
Driveshaft ID Chart
Engine Torques Specs
Fuel Baffle Chart
Gauge Information
Impeller Info Chart
OEM Kit Info Chart
Mikuni Carb Specs
Mikuni Test Tips/Tricks
MPEM Ref & Programming
Non-Wired MPEM Test
SDS Opinion on Oil
Rotax Crankcase ID
Rotax Engine Info
Rotax Casting Info
Sea Doo Paint Codes
Seat Reference Chart
Spark Plug Reading
1995-2004 VTS Test Info
1995 & UP VTS Tech Info
029/358 VTS Module Test
Water Flooded 2 Stroke
Wear Ring Removal
4 Stroke Fault Codes
More SDS Tech Info
Sea Doo Manuals

If you've bought one of our carb kits, a great page by GroupK that details the procedures for carb fine tuning can be found HERE

TECH TIP...
If you're installing an impeller on a Sea Doo, don't follow the manual when it calls for red loctite on the threads... use anti-sieze instead. That way if you want to take it apart again you can. We've built hundreds of pumps now with anti-seize and it works great!

Copyright © 2022 OSDparts.com. Powered by Zen Cart